COMMERCIAL CANNABIS MILL
M210 Mill
GMP-Ready
Tool-Free Disassembly
Fast Operation
35-200 dry lbs/hr
Zero Heat Degradation
Improve Downstream Profit
CO2 extraction and pre-roll equipment demand accurate and precisely milled feedstock. Inconsistent feedstock can create downstream inefficiencies and losses, while high-quality feedstock can save thousands of dollars by reducing operation cycle times and increasing equipment uptime.
The Mobius M210 commercial cannabis mill delivers exceptionally consistent results across all screen sizes:
- Approximately 80% of milled material is 75% - 85% of the screen size. For example, when milling with a 2mm rasp screen, 80% of the material will be between 1.5mm and 1.7mm.
- The remaining 20% of material will be distributed between fines (i.e. <75% of the screen size) and max particle size (i.e. > 85% of screen size up to a maximum of screen size).
Particle Size Distribution
Ready for Any Use
Variable speed operation and unlimited screen configurations give you total control over your product — regardless of the strain or moisture level. The result? Uniform particle size with practically zero trichome dust.
Pre-Rolls
The low-speed design of the M210 Mill combined with our proprietary Rasp Screen in the milling chamber delivers a consistent, homogenous grind without potency loss. The result is ground herb perfect for a pre-rolled cone.
Fresh Frozen
The M210 operates in a freezer, so fresh frozen material can be milled without raising the temperature of your flower or trim or affecting its market value.
High-Yield Extractions
A precise grind delivers higher extraction yields. So the M210 commercial cannabis mill has screen configurations for optimizing CO2, ethanol, and hydrocarbon extraction processes.
Find Your Size
= recommended | 
= can be used | 
= not recommended | *** = included with each M210
| MILL SCREEN |
HOLE SIZE |
PRE-ROLLS |
CO2 EXTRACTION |
ETHANOL EXTRACTION |
HYDROCARBON EXTRACTION |
FRESH FROZEN |
| 10-02-002806 ULTRA FINE RASP |
1.6mm
1/16" |
|
|
|
|
|
| 10-06-002837 FINE RASP |
2.0mm
5/64" |
|
|
|
|
|
| 10-02-002805 MEDIUM STANDARD MILLING |
3.2mm
1/8" |
|
|
|
|
|
| 10-06-002804 COARSE STANDARD MILLING |
4.7mm
3/16" |
|
|
|
|
|
| 10-02-002803 COARSE BLENDING |
6.4mm
1/4" |
|
|
|
|
|
| 10-06-004795 COARSE CHUNKING |
12.7mm
1/2" |
|
|
|
|
|
| 10-06-004796 ULTRA COARSE CHUNKING |
19mm
3/4" |
|
|
|
|
|
The Mill operates very differently depending on the strain and moisture levels. Some producers may use different screens on different strains for the same process.
SImple and Robust
Designed for easy operation and long service life, the Mobius M210 has a large capacity and is built for industrial facilities that demand 100% stainless, low-maintenance equipment.
20 Second Disassembly
Tool-free disassembly and an all-stainless construction make the M210 easy to clean by hand or with a pressure washer, making GMP compliance easy.
SAFE OPERATION
The M210 features a glove-friendly control panel with an emergency stop conveniently positioned within easy reach of the operator.
Controls include variable speed, reset, forward, and reverse. The M210 is CSA compliant for guarding and has a safety interlock on the access door.
Money-Back Guarantee
YOUR INVESTMENT IS 100% Risk-Free
Every Mobius M210 comes with our unprecedented money-back guarantee. If you are not blown away by the speed, power, and precision of M210 — or if it deviates from your processing performance requirements in any way — simply return the mill for a full refund.
Get the M210 Cannabis Mill
Resources
Integrate with the Automation Suite
Connect with an Expert
FAQs
How does the M210 grind cannabis to a consistent particle size?
Unlimited screen options give the operator full control over the grind. This paired with variable speed operation ensures that the particles are consistent no matter the desired output size.