M60 Cannabis Mill
Compact Cannabis Pre-Roll Grinder
All-Purpose Mill
Built for smaller to medium-sized throughput production, the M60 Mill is a smart choice for any trim room. Offering unlimited screen configurations and variable speed operation, the mill can be used for more than just pre-roll preparation.
Pre-Rolls
Produce flower that is milled to an ultra-consistent particle size. Interchangeable screens allow you to grind to 2mm, 3mm, or even custom sizes, enabling you to match the right particle size with your pre-roll machine. The unique design of our proprietary Rasp Screen, paired with the low speed of the mill, ensures zero heat degradation. The result is high-quality flower ground to a perfect consistency that delivers smooth, even-burning joints.
Extracts
Have total control over your product with the M60 Mill when preparing material for extraction. With multiple screen options available, you can optimize your workflow for different types of extraction, including ethanol, CO2, and hydrocarbon processes.
Fresh Frozen
Operate the M60 Mill in cryogenic environments for the most potent fresh-frozen product. With additional milling screens available for coarse chunking and ultra coarse chunking, deliver high-quality fresh-frozen products with full trichome and terpene profiles.
Find Your Grind
= recommended | 
= can be used | 
= not recommended | *** = included with each M60
| MILL SCREEN |
HOLE SIZE |
PRE-ROLLS |
CO2 EXTRACTION |
ETHANOL EXTRACTION |
HYDROCARBON EXTRACTION |
FRESH FROZEN |
| 16-02-005860 ULTRA FINE RASP |
1.6mm
1/16"
|
|
|
|
|
|
| 16-06-006072 FINE RASP |
2.0mm
5/64"
|
|
|
|
|
|
| 16-02-005561 MEDIUM STANDARD MILLING |
3.2mm
1/8"
|
|
|
|
|
|
| 16-02-006234 COARSE STANDARD MILLING |
4.7mm
3/16"
|
|
|
|
|
|
| - COARSE BLENDING |
6.4mm
1/4"
|
|
|
|
|
|
| - COARSE CHUNKING |
12.7mm
1/2"
|
|
|
|
|
|
| - ULTRA COARSE CHUNKING |
19mm
3/4" |
|
|
|
|
|
The M60 Mill may operate differently depending on the strain and moisture content of your cannabis flower. Some cultivators may use different screens with different strains, even for the same processes.
Built to Last
Easily swap out the milling screens without halting production. Keep your workflow dialed in with quick and simple 10-minute cleaning while keeping worker safety at the forefront.
Easy to Clean
Tool-free disassembly and an all-stainless construction make the M60 easy to clean by hand or with a pressure washer.
Worker Safety
The M60 Mill has a glove-friendly control panel featuring an emergency stop, conveniently positioned within easy reach of the mill operator. The M60 is CSA-compliant for guarding and has a safety interlock on the access door.
100% Risk-Free
You receive a 100% money-back guarantee with every purchase of the M60 Mill. We want to ensure you get the operational improvements you are looking for.
Get the M60 Mill
Resources
Integrate with the Automation Suite
Connect with an Expert
FAQs
Yes. With multiple screen size options available, the M60 Mill is perfect for pre-roll preparations. The mill grinds cannabis to a consistent 2mm to 3mm (or custom) particle size that is ideal for smooth, even-burning joints.
The main difference between the two commercial grinders is the throughput capacity and their physical size. The M210 can process up to 200 lbs/hr of dry flower, while the M60 Mill has a 20 lbs/hr capacity. The M60 is a tabletop version of the larger M210.
The mill has tool-free disassembly for fast, easy cleaning. The components of the machine are all stainless steel, and everything can be cleaned by hand or pressure washed within 10 minutes.