Changing the MBX Bucker Wheels

MBX Bucker

Changing the Wheels

How to remove the indoor casters and replace with optional outdoor wheels.

 

Step by Step

01

MBX-wheel-change_01a

Unscrew the 4 bolts holding the caster to the underside of the bucker using a 7/16” socket or box end wrench.

02

MBX-wheel-change_02a

Place one of the u-shaped brackets over the foot of the bucker, aligning it approximately with where the old wheel was.

03

MBX-wheel-change_03a

Remove the nut and one of the large washers from the end of the axle on one of the outdoor wheel assemblies, keeping the rest of the assembly intact.

04

MBX-wheel-change_04a

Align and push the axle of the wheel assembly through the hole in the bracket

05

MBX-wheel-change_05a

Place the washer and the nut on the end of the axle.

06

MBX-wheel-change_06b

Use channel locks or vise grip locking pliers to hold the axle in place.

07

MBX-wheel-change_07b

Using a 15/16” box end wrench or socket, tighten the nut. Repeat these steps for the 3 other wheels.

Additional MBX Instructions

04a
MBX Bucker Quick Start
MBX-wheel-change_07b
Changing the MBX Bucker Wheels
MBX-Align-Chip-Step13
Aligning the MBX Chipper
mbx-cleaning-featured
Cleaning your Mobius MBX Bucker
22a
Changing The MBX Bucker Rolls