Electrical Box Filter Removal & Installation

Mobius M108S Trimmer

Electrical Box Filter Removal & Installation

The Electrical Box Filter Assembly Will Help Protect the Electrical Components in Your M108S.

 

Step by Step Filter Installation

01

001

The assembly is comprised of two components. The metal piece is the filter holder. The white strip is the actual filter material, or filter mesh.

02

002

Start by tucking the filter mesh strip into the filter holder. Work your way around the edges until the filter mesh is seated flat against the grate of the filter holder.

03

electircal-box-filter_3

The left side of the filter holder and filter mesh should be flush, while the right side will have a small strip sticking out.

04

04a

Before installing the filter make sure the M108S is unplugged.

Then simply push the filter assembly up into the electrical box air intake located just below the power plug. These are no tools required.

05

05a

The filter assembly should just snap into place. Tuck the loose end of filter mesh into the corner above the bolts.

06

06a

We've removed the side panel from this unit so in this view you can see what it looks like from inside.

Additional M108S Instructions

M108S---Instructional---LR---02
Uncrating & Assembly
Mobius_M108S-13
M108S Trimmer Tandem Setup
08
Blade Cartridge Removal & Installation
S&I-09
Separator Installation
02a
Electrical Box Filter Removal & Installation
Lid Removal-05
Lid Removal & Installation