PreparationBlade SystemNon-Cutting ComponentsBody & LidTumbler & BrushFan Housing Filter Bags Mobius M108S Trimmer Cleaning Procedures Download PDF Back to All Instructions Before you Begin Recommended Preparation 01 Review Review cleaning fundamentals to optimize your cannabis equipment cleaning validation protocol. 02 Dry Prep Use compressed air or a vacuum, to remove any loose excess material from…

Mobius M108S Trimmer Preventative Maintenance ON THIS PAGE Back to All Instructions Perform Before Each Use Note: Perform These Steps With The Machine Unplugged Ensure wires are not kinked or frayed. Ensure rings and end caps are flush and sealed, and that the rings are properly hydrated. If you’re trimming and washing your tumbler daily,…

Mobius M108S Trimmer Service Position Putting your M108S Trimmer into Service Position   Back to All Instructions Step by Step M108S Servicing Position Download PDF 01 Disconnect the power cord from the machine. Open the lid, disconnect the connection between the lid and the body and remove the lid. If you need further instruction for…

Mobius M108S Trimmer Control Panel Removal Removing the control panel to access the wiring harnesses in behind   Back to All Instructions Step by Step Download PDF 01 With the machine unplugged, remove the separator and fan housing from the M108S body. 02 To the right of the control panel you’ll see 4 screws. Remove…

Mobius M108S Trimmer Lid Bearing Removal & Installation This video will detail the removal, cleaning and replacement of the Black Rings in the ends of the M108S Lid   Back to All Instructions Step by Step Download PDF 01 Remove the lid and set it in on a stable work surface. Using a 1/8″ Allen…

Mobius M108S Trimmer Breakdown for Cleaning Breakdown for Cleaning of the M108S Trimmer   Back to All Instructions Step by Step Download PDF 01 Open the lid, install the Spring Jack tool, and start by removing the tumbler. 02 While one person is doing this, another team member can remove the blade components. 03 The…